17
Installation
Connecting equipment without an HDMI jack (TV, DVD/BD player, etc.)
Cables to be used
Cables to be used
Pin cable
White
Red
White
Red
Optical cable
Check the jack type of the connected equipment before purchasing additional cable. The type of the plug to be connected to the
unit is
.
Refer to the operating guide of each device for proper connection instructions.
Amplifier connections
Amplifier connections
Optical cable (not supplied)
Use one of these
cables for
connection.
To Optical Digital IN
Pin cable (not supplied)
To Optical Digital Audio OUT
To Analog Audio OUT
To Audio OUT
To Optical Digital
Audio OUT
Optical cable (supplied)
To Optical Digital
Audio IN (TV)
Use one of these
cables for
connection.
without an HDMI output jack
Player
TV
Video cord
To Video OUT
To Video IN
The optical digital audio input
jack is covered. Just insert the
plug into the covered jack after
making sure it is pointing the
correct way.
Connect to the Digital Audio
IN (TV).
Signal
Signal
Signal
Signal
White
Red
White
Red
White
Red
White
Red
For connections via an optical cable
For connections via an optical cable
Set the digital audio output setting on the connected equipment (such as a TV) to “Auto” or “Bitstream”, etc. Refer to the operating
instructions of the connected equipment for setup.
• The optical cable may be damaged if it is bent excessively.
• The sound volume may be lower if an audio cable with a built-in resistor is used.
• When the unit is connected to a TV or player with an audio cable, use the remote control of the connected equipment to change the sound
setting for sound multiplex broadcasting programs.
HAV-R400G_R500G.indb 17
HAV-R400G_R500G.indb 17
11/10/2011 9:31:26 AM
11/10/2011 9:31:26 AM