27
REMOVING AND INSTALLING RAKE TINES
WARNING
CRUSHING HAZARD
Falling implement can cause serious injury or death.
Securely block up the implement before working
underneath.
◂
W-2565
WARNING
IMPACT AND INJECTION HAZARDS
Flying debris or pressurized fluids can cause serious
injury or death.
Wear safety glasses to prevent eye injury when any
of the following conditions exist:
•
When fluids are under pressure.
•
Flying debris or loose material.
•
Engine is running.
•
Tools are being used.
◂
W-2019
1.
Park the machine on a flat level surface. Lower the
three-point tine rake setting on the ground. See the
machine Operation & Maintenance Manual for
detailed information on operating the three-point
hitch.
2.
Stop the engine and exit the machine.
(See Entering And Exiting The Compact Tractor on
Page 11)
3.
Remove the pivot mount assembly.
(See Removing And Installing Pivot Mount on Page
25)
Figure 36
P-96322a
4.
Remove the jackstand (Item 1) and place the pivot
assembly (Item 2) [Figure 36] on the ground.
When installing, place a jackstand under the pivot
assembly.
Figure 37
P-96321a
5.
Remove the bolts and nuts (Item 1) [Figure 37].
When installing, install and tighten the bolts and nuts
to 47 N·m (35 ft-lb) torque.
Figure 38
P-96320a
6.
Remove upper retaining channel / pivot mount (Item
1) [Figure 38].
When installing, place the upper retaining channel /
pivot mount in position, aligning the mounting holes.
