16
4.
Install the locking pin (Item 1) [Figure 19] and lower
retaining pin.
Backfilling Positioning
The following images may not show your exact three-
point implement but the procedure is the same.
Figure 20
C217656a
1.
Remove the lower retaining pin (Item 1) [Figure 20].
2.
Remove the locking pin (Item 2) [Figure 20].
WARNING
PINCHING HAZARD
Failure to follow instructions can cause serious
injury.
Keep fingers and hands out of pinch points when
installing and removing implement or
attachments.
◂
W-2571
3.
Rotate the implement 180° or to a rearward angled
position. Install the locking pin (Item 1) [Figure 20]
and retaining.
Operating The Three-Point Implement
The three-point tine rake can be used for leveling and
landscaping.
1.
Park on flat level ground. Lower the three-point tine
rake slightly above the ground. See the compact
tractor Operation & Maintenance Manual for detailed
information on operating the three-point hitch.
2.
Stop the engine and exit the compact tractor.
(See Entering And Exiting The Compact Tractor on
Page 11)
WARNING
UNINTENDED MOVEMENT HAZARD
Failure to follow instructions can cause serious
injury or death.
Before you leave the operator’s seat:
Fully lower the loader arms, put the attachment
flat on the ground (if equipped).
Fully lower the implement(s) to the ground (if
equipped).
Lock brake pedals together (if equipped) and
engage the parking brake.
Place all controls in neutral.
Stop the engine, unfasten the seat belt, and
remove the key.
◂
W-3178
3.
Adjust the three-point tine rake in any single or
combination of the following position:
a.
Angled (See Angled Positioning on Page 15)
b.
Backfilling
(See Backfilling Positioning on Page 16)
4.
Enter the compact tractor
(See Entering And Exiting The Compact Tractor on
Page 11) . Start the engine and release the parking
brake.
WARNING
GENERAL HAZARD
Failure to follow instructions can cause serious
injury or death.
•
Fasten seat belt, start, and operate only from
the operator’s seat.
•
Never wear loose clothing when working near
machine.
◂
W-2135
5.
Slowly drive the tractor with the three-point tine rake
on the ground. Adjust the three-point hitch for
desired position. See the compact tractor Operation
& Maintenance Manual for detailed information
operating the three-point hitch.
6.
The top link may need to be adjusted to set the rake
times to the correct positions.
Watch for and avoid obstructions and obstacles that
could cause damage to the three-point tine rake and
compact tractor.
Damage to the three-point tine rake and compact
tractor may occur by hitting hidden objects.
Removing The Three-Point Implement
Lowering The Storage Stand
NOTE:
Your machine and attachment and / or implement
models may vary, but the procedure is the same.
