15
Figure 17
P142007g
3.
Raise the implement to the travel position
[Figure 17]. See the compact tractor Operation &
Maintenance Manual for detailed information on
operating the three-point hitch.
4.
Drive the compact tractor and implement to the work
area.
5.
When operating on public road or highway, always
follow local regulations. For example; Slow Moving
Vehicle (SMV) emblem or directional signals and
hazard / flasher lights may be required.
6.
Park on flat level ground.
7.
Lower the implement slightly above the ground. (See
the compact tractor Operation & Maintenance
Manual for detailed information on operating the
three-point hitch.)
8.
Stop the engine and exit the compact tractor.
(See Entering And Exiting The Compact Tractor on
Page 11)
WARNING
UNINTENDED MOVEMENT HAZARD
Failure to follow instructions can cause serious
injury or death.
Before you leave the operator’s seat:
Fully lower the loader arms, put the attachment
flat on the ground (if equipped).
Fully lower the implement(s) to the ground (if
equipped).
Lock brake pedals together (if equipped) and
engage the parking brake.
Place all controls in neutral.
Stop the engine, unfasten the seat belt, and
remove the key.
◂
W-3178
Angled Positioning
NOTE:
Your machine and attachment and / or implement
models may vary, but the procedure is the same.
Figure 18
C217656a
1.
Remove the lower retaining pin (Item 1) [Figure 18].
2.
Remove the locking pin (Item 2) [Figure 18].
WARNING
PINCHING HAZARD
Failure to follow instructions can cause serious
injury.
Keep fingers and hands out of pinch points when
installing and removing implement or
attachments.
◂
W-2571
3.
Rotate the implement to one of the forward angled
positions.
Figure 19
P-96315a
