22
MAINTENANCE SAFETY WARNINGS
•
Never service the Ignite Attachments attachment / implement without instructions. Read and
understand the Operation & Maintenance Manual and safety signs (decals) on machine.
•
Follow warnings and instructions in manuals when making repairs, adjustments or servicing.
Check for correct function after adjustments, repairs or service. Untrained operators and failure to
follow instructions can cause injury or death.
This Safety Alert Symbol means: “Attention! Be Alert! Your Safety is Involved!” Carefully read the
message that follows.
• Never service attachments / implements without
instructions. See Operation & Maintenance Manual and
Attachment / Implement Service Manual.
• Cleaning and maintenance are required daily.
• Never service or adjust attachment / implement with the
engine running unless instructed to do so in manual.
• Always lower the attachment / implement to the ground
before lubricating or servicing.
• Avoid contact with leaking hydraulic fluid or diesel fuel
under pressure. It can penetrate skin or eyes.
• Stop, cool, and clean engine of flammable materials
before checking fluids.
• Keep body, loose objects, and clothing away from
moving parts, electrical contacts, hot parts, and exhaust.
• Safety glasses are needed for eye protection from
electrical arcs, battery acid, compressed springs, fluids
under pressure, and flying debris or when tools are used.
Use eye protection approved for type of welding.
Maintenance procedures which are given in the Operation & Maintenance Manual can be performed by the owner/operator
without any specific technical training. Maintenance procedures which are not in the Operation & Maintenance Manual must
be performed ONLY BY QUALIFIED SERVICE PERSONNEL. Always use genuine Ignite Attachments replacement parts.
