-
4
-
www.igmtools.com
09
10
11
12
13
14
01
02
03
08
07
06
04
05
3.3 Risks
Risk exists even when using the machine according to
the manual.
WATCH OUT! Heated glue may reach the
temperatures of 200°C. Do not touch any hot
parts.
The glue may contain harmful chemicals. Therefore,
ensure sufficient ventilation of your workplace.
3.4 Important notice
Make sure the machine has been off for at least 60 minutes
before storing it in the portable case. That way, the glue in
the container will cool down to 60°C. Use a piece of cloth
to wipe any adhesive residues on the machine.
The Edgebander is designed for interior work. Do NOT use
the machine outdoors!
If you want to prevent debris falling into the glue pot. Put
on the lid. If debris is already in the pot, remove the glue,
turn on the machine for approximately 3 minutes, the glue
should come out easily now. Re-fill with glue again
.
1 Infeed tape guide
2 Digital display - function settings
3 Set up of pressure of tape on application roller the
4 Main switch
5 Fuse
6 Cabel spring protection
7 Corner guide for simple of inner corners glueing
8 Speed regulation and off switch
9 Outfeed roller
10 Support table locking lever
11 Support table with a handle
12 Glue pot cover
13 Regulation of amount of glue
14 Infeed roller pressure plate
4. SPECIFICATIONS OF THE MACHINE
4.1 Machine description
4.2 Technical data
Input power
855 W / 230 V
Tape thickness
0,4 - 3 mm
Tape width
10 - 65 mm
Temperature range MODE I
120 ° - 200 °C
MODE II
80 ° - 155 °C
Feed speed
2 - 6 m/min
Shipping size
35x30x37,5 cm
Weight
8,8 kg
Shipping weight
11,1 kg
Warm-up time (120 °C)
4 minutes
Fuse
F 6 A (230 V)
Cable length
5 m
Glue pot capacity
400 ml
Operating instructions EN
