-2-
www.igmtools.com
Please read this manual thoroughly and follow the safety instructions in it! Technical changes and
printing errors reserved!
Dear customer,
This manual contains important instructions and information for the installation and proper use of
edgebanders BR500.
This manual is part of the machine and therefore it should not be kept elsewhere than in the vicinity of the
machine so that you can be consulted at any time by you or other persons operating the machine.
Please read and follow the safety instructions!
Carefully read these instructions before using the machine. Operation of the machine will be
simpler and you will also lower the risk of injury while eliminating the probability of incorrect
operation and possible damage to the machine.
Because of our policy of constant improvement, the design, construction or pictures may differ
slightly. Should you discover any mistakes, please contact us at [email protected].
1. DECLARATION OF CONFORMITY
The undersigned: IGM nástroje a stroje s.r.o.
Address: Ke Kopanině 560
Tuchoměřice, Praha-západ, PSČ 252 67
Czech Republic, EU
Phone no.: +420 220 950 910
Certifies the
Product: Manual Edgebander for ABS
Type:
BR500
Manufacturer: CO-MATIC Machinery Co.,
Ltd.,No.473-16,
San Feng Road, Houli District, Taichung
City,Taiwan, R.O.C. 42156
We declare under our own responsibility that the
product described in this manual complies with the
following norms: EN ISO 12100, EN ISO 13857, EN 349,
EN953, EN 60204-1, EN ISO 11202,
EN 55014-1, EN 55014-2 and is in accordance with the
2006/42/EC, 2004/108/EC, 2006/95/EC, 2002/95/EC.
Signed: Ivo Mlej
Managing Director
2. WARRANTY SERVICE
The warranty is subject to Terms and Conditions and
Warranty Conditions of IGM nástroje a stroje s.r.o.,
the current version of which are available at www.
igmtools.com.
Table of contents
P.
1. DECLARATION OF CONFORMITY
2
2. WARRANTY SERVICE
2
3. SAFETY INSTRUCTIONS
3
3.1 Advice
3
3.2 General safety instructions
3
3.3 Risks
4
3.4 Important notice
4
4. SPECIFICATIONS OF THE MACHINE
4
4.1 Machine description
4
4.2 Technical data
4
4.3 Contents
5
5. TRANSPORT, UNPACKING AND ASSEMBLY
5
5.1 Transport and unpacking
5
5.2 Assembly
5
5.2.1 Mounting the corner guide
5
6. SET-UP AND ADJUSTMENT
5
6.1 Preparing for work
5
6.1.1 How to measure and set up the width of the tape
5
6.1.2 Control and gauge set up on the supporting table
6
6.1.3 Adjusting the amount of glue
6
6.1.4 Adjusting tape thickness
6
6.1.5 Setting length of tape
6
6.1.6 Fastening the workpiece before edge banding
7
6.1.7 Refilling glue
7
6.2 Before turning on
7
6.3 Standby mode
7
6.4 Functions of control panel
7
7. WORKING WITH THE EDGEBANDER
8
7.1 Edgebanding
8
7.2 Stationary use
9
8. MAINTENANCE AND CONTROL
9
8.1 Maintenance after work
9
8.2 Glue control
9
9. MALFUNCTION ASSISTANCE
9
9.1 Error codes for BR500
9
9.2 Problem solving
9
10. ENVIRONMENTAL PROTECTION
10
11. ACCESSORIES (SPARE PARTS)
10
Operating instructions EN
