-
4
-
www.igmtools.com
Operating instructions EN
4. SPECIFICATIONS OF THE MACHINE
4.1 Machine description
1
2
3
5
6
7 8
9
10
11
12
14
13
15
4
Never leave the machine unattended. Always switch
the machine off when leaving the workspace.
Watch your fingers and other body parts when
working. Never walk away from a machine without
protective guards.
Do not place anything on the machine.
Electrical connections malfunctions can be repaired
by an electrician only. Damaged electric cord must be
replaced immediately.
Any adjustments and maintenance may be carried out
when the machine is disconnected from the power
source.
3.3 Risks
Risks may arise even during proper and prescribed use
of the machine.
The danger of a workpiece flying off. Beware of noise
and dust.
Wear eye, ear and dust protection.
Use a suitable dust extraction device! Watch out for
damaged electrical cords.
3.4 Important notice
Only use the feeder in an appropriate environment.
Keep your workspace well ventilated and lighted,
avoid wet or damp environments.
Only operate the machines under temperatures
ranging from +5°to +40°C. Humidity from 30% to 95%.
3.5 Safety rules
The tool must reach working speed before feeding.
Do not overload the machine by feeding material too
quickly.
ALWAYS keep your hands away from rotating parts.
Provide additional support and stability for larger
workpieces.
Always switch off the feeder first, only then switch off
the machine that is being fed material.
Always disconnect the power cord before any repairs
or adjustments.
1 base
2 locking lever (turning)
3 height-adjustable arm
4 locking lever (height adjustment)
5 stand
6 height control (turning alters height)
7 locking lever (protrusion)
8 feeder arm
9 screws (positioning joint)
10 locking lever (turning)
11 locking lever (angle of the feeder)
12 motor
13 control wheel of arm protrusion (turning moves
the arm)
14 feeder grip
15 rollers housing
4.2 Technical data
Type
MX48
Motor power (230V)
750W
Horizontal Movement
460mm
Vertical Movement
250mm
No. of rollers
4
Size of rollers
120x60mm
Feed speed
3.5-32m/min
Weight with stand
62kg
4.3 The package includes
feeder
feeder stand arm
quick adjustment joint
plan for base drilling 1:1 manual
