-10-
www.igmtools.com
Operating instructions EN
8. SPEED CONTROL
Notice: cut out the power before adjustment
Appropriate feeding speed rate and well sharped
cutting blade can cause the procedure process quality
and efficiency.
Determinate the correct feeding speed by the
hardness of the work-piece, material and the desired
cutting procedure.
Listen attentively while feeder rotating and re-check
the sample after procedure process then adjust
setting to desired result.
Maintain the cutting blade and keep it sharpe all the
time.
Speed shifting: Cut out the power before shifting.
Rotate the rollers while switch the speed to allow the
clutch and derailleur get engaged properly.
Derailleur and gear settle
• Model 34/44/04
(A) +Derailleur control(Fig 16-1)
• Model 38/48 (3PH)
(A) +(C)+ Derailleur control (Fig 16-2)
• Model 38/48 (1PH)
(B) +(C)+Derailleur control (Fig 16-2)
• Model MX
(A) +Derailleur(Fig 16-3)