REFRIGERATION LTD
6
www.igloorefrigeration.com
|
Pastry Cases
High ambient temperatures will cause the compressor to overwork.
Humidity may cause rust, condensation around glass or stainless steel and decrease the efficiency of the
unit.
3.3. Connection and start-up
Unpack the unit.
Place the unit on an even and hard base. Then level the unit with the levelling legs. (Figure 2)
Remove the protection foil from the elements of the unit (e.g. from the inside of the unit, display shelves,
front bumper)
To securely transport the equipment, the unit may be shipped partially disassembled. If the user received
the unit partially disassembled, perform the following operations:
1.
Place the Fixed shelf grip in perforated frame strip. (Figure 3/5)
2.
Mount cross bars. (Figure3/3 and Figure 3/4)
3.
Place shelves on fixed grips.
4.
Mount front glass of the display case.
The equipment should be cleaned right after unpacking and before turning the unit on. The unit should be
cleaned with warm water not exceeding 40°C with a neutral detergent. For washing and cleaning the
equipment, it is prohibited to use products containing chlorine and sodium varieties, which destroy the
Figure 2 Leveling legs
A –Screw the leg in nuts
Figure 3 Mounting wire
shelves
1 – Perforated frame stip
2 – Plastic wire shelf
3 – Cross bar with lamp
4 – Cross bar
5 – Fixed shef grip
