![background image](http://html1.mh-extra.com/html/igenix/ig6550/ig6550_instructions-for-use-manual_3920601007.webp)
- 7 -
Program Summary / Selection
Intensive Wash
Water Temperature:
Wash 54°C / Rinse 69 °C
Programme Du Heating Time: 125 minutes
Water Consumption:
10.4 Litres
Normal wash
Water Temperature:
Wash 52°C / Rinse 67°C
Programme Du Heating Time: 130 minutes
Water Consumption:
10.4 Litres
Rapid wash
Water Temperature:
Wash 49°C / Rinse 55°C
Programme Du Heating Time: 70 minutes
Water Consumption:
9.6 Litres
3 in 1 Wash
Water Temperature:
Wash 54°C / Rinse 69°C
Programme Du Heating Time: 120 minutes
Water Consumption:
10.4 Litres
Rinse
Water Temperature:
Incoming Water Supply
Programme Duration Time: 12 minutes
Water Consumption:
5.4 Litres
Please Note: Washing times may vary depending on the temperature of the incoming water and the environment temperature.
Troubleshooting
Problem
Possible Causes
Possible Solutions
Dishwasher not receiving
Electrical power.
Check the dishwasher is plugged in and
switched on at the mains power supply.
Dishwasher will not start
Door is unlatched.
Close and latch door.
Arrange dishes so spray action reaches all
surfaces.
Improper loading
Do not overload dishwasher.
Spray arm not rotating freely
Check spray arm to make sure nothing (i.e.
cutlery) is obstructing spray arm rotation.
Check if filter screen has become dislodged
and obstructing spray arm rotation.
Use more dishwasher detergent.
Do not use detergent that is hard or cracked.
Not enough detergent and / or
improper detergent being used.
Use only dishwasher detergent.
Improperly prepared dishes.
Excess food soil and liquids should be
removed from dishes before loading.
Water inlet hose kinked / bent due
to improper installation.
Eliminate kink or bend from Inlet hose.
Dishes are not clean
The filter lose its position
Ensure that the filter in the correct position.
Chipping or breaking glassware
Improper loading of dishes.
Do not overload dish rack. Load glasses on
the bottom rack only.
A small amount of water (in sump
area) is normal.
This is necessary to keep the pump primed
and is drained automatically at the beginning
of each cycle.
Water remains in bottom of
dishwasher
Excessive amount of water, cycle
not completed.
Allow dishwasher to complete full cycle.
Pump is blocked.
Use clean water to clear the filter and water
sump by running a normal washing cycle.
Keeps draining water
Too high water level
Checking if there is something wrong with
inlet valve