Starter kit for ecomatController EC2121
38
>
5.4.2
Test program
57295
Now the program can be tested.
When the potentiometers are positioned at the right end stop, both switches [IN0100] and [IN0101]
can be switched on. Only if both switches are switched on, is the lamp [OUT0000] on.
This behaviour can also be seen in CODESYS. Here, a supplied H signal is shown as TRUE and an L
signal as FALSE.
Congratulations! You have successfully created your first program in CODESYS 3.5, loaded it to the
controller and tested it.
