IFM DP2122, Руководство по эксплуатации

Страница: 7 / 33

Speed monitor DP2122
7
4 Function
Depending on the setting of the IO-Link parameter [CMPT], the unit displays the current frequency in
Hz or the rotational speed in RPM. It generates output signals according to the operating mode and
the parameter setting. In addition, it makes the process data available via IO-Link (in Hz or RPM,
depending on the operating mode).
The unit is designed for half-duplex communication. So the following options are possible:
• Remote display: reading and displaying the current frequency/speed
• Remote parameter setting: reading and changing the current parameter setting
• IO-Link parameter setting: IO Device Description (IODD) ( Ò / 8)
4.1 Operating modes
The following operating modes are available:
Operating mode 1: HZ_M (default)
Description Displays the frequency in Hz
Application Standard applications with frequency measurement in Hz
IODD designation DP2122 Factory setting / (CMPT=HZ_M)
IO-Link device ID 1167 d / 00 04 8f h
IO-Link parameter CMPT HZ_M (default)
Operating mode 2: rpnM
Description Displays the frequency in revolutions per minute (RPM)
Application Converted values in RPM
IODD designation DP2122 Status_B / (CMPT=rpnM)
IO-Link device ID 1294 d / 00 05 0e h
IO-Link parameter CMPT rpnM
In operating mode 2, the display of the unit always shows kRPM.
Manual selection of the operating mode:
CMPT ─ indication of the operating mode (
Ò /
25) and ModE ─ switch point mode (
Ò /
21)
for OUT2
Selection of the operating mode via IO-Link interface:
see document "Addition to the operating instructions: Selecting the operating mode using an IO-
Link interface" at
www.ifm.com
4.2 Application as an IO-Link device
4.2.1 General information
The unit has an IO-Link communication interface which requires an IO-Link capable module (IO-Link
master).
The IO-Link interface allows direct access to the process and diagnostic data and enables setting of
the parameters of the unit during operation.
You will find further information about IO-Link and all the necessary information about the required IO-
Link hardware and software at:
www.ifm.com/gb/io-link
GB