IFM AL1060, Руководство по эксплуатации

Страница: 13 / 22

IO-Link master with USB interface 1 port IP 65 / IP 67
13
8 Set-up
Content
Install LR DEVICE ..................................................................................................................................13
60824
► Connect IO-Link Master to computer (→
Electrical connection (
→ p.
10 )).
► Optional: Connect the IO-Link master to an additional voltage supply.
>
When connected to the USB port of the computer, the IO-Link master starts with the factory
settings.
>
The display elements signal the current operating status (
→
Operating and display elements
(
→ p.
12 )).
No special drivers are required to operate the device in Microsoft Windows 10. Once connected to the
USB interface, the operating system recognises the device and automatically installs the necessary
USB drivers.
Further steps:
► Connect the IO-Link device to the IO-Link master (→
Electrical connection (
→ p.
10 )).
>
The IO-Link master supplies the connected IO-Link device with operating voltage.
>
8.1 Installing LR DEVICE
60825
The ifm software LR DEVICE (version 1.7.x or higher, art. no. QA0011/12) is required to configure the
IO-Link master and the connected IO-Link device.
For basic functions of the LR DEVICE software:
→ Software manual LR DEVICE
► Start the PC.
► Log in with administrator rights.
► Install parameter setting software LR DEVICE.
Further steps:
•
→
Parameter setting (
→ p.
14 )