edgeController
9
4
Mounting
Content
Mounting accessories ............................................................................................................................... 9
General installation instructions ............................................................................................................... 9
Panel mounting / control cabinet installation ..........................................................................................13
Surface mounting with RAM® mount system .........................................................................................17
Other installation types ...........................................................................................................................18
34058
>
4.1
Mounting accessories
61272
The unit is supplied without mounting accessories.
Depending on the intended installation location and type of mounting, the following mounting
accessories are available:
•
EC0733, installation kit for panel mounting
•
EC1410...EC1414, RAM® mount system for surface mounting
You can find more information about the available accessories at:
>
4.2
General installation instructions
61273
The following applies to all types of mounting:
The responsibility for the compliance with the requirements concerning mounting of the device
in the application lies with the system architect.
The unit front withstands shock up to IK07 without damage.
NOTICE!
Higher shock > IK07
>
Damage possible
Protection rating and electrical protection might be impaired
► If necessary, the system creator must take external measures to protect the device
depending on the requirements of the corresponding application.
► Replace damaged units, otherwise the technical data and safety will be impaired.
On the back, the pressure compensation element, the service cover and the connector areas
are to be protected by taking external measures, if necessary.
>
