edgeController
17
>
4.4
Surface mounting with RAM® mount system
61282
Using the RAM® mount components, available as accessories, the unit can be used as a firmly
mounted desktop unit. Two ball heads allow variable orientation of the unit.
RAM® mount components
1: Mounting arm with fastening screw
2: Mounting plate with ball head
Device with mounted RAM® mount system
You will find more information about the available RAM® mount components at:
>
4.4.1
Mounting steps
61283
► Screw the mounting plate to the back of the device.
▪
Usable M5 thread depth: ≤ 8 mm
▪
tightening torque M5: 5 ±0.5 Nm
► Screw second mounting plate / ball of the selected RAM® Mount component on suitable surface
according to RAM® Mount indications.
38,1
30
5,3
Mounting plate with ball head
