edgeController
20
>
5.1
General wiring information
61286
Wiring of the connectors (→ Data sheet).
1
2
3
5
4
Connectors (back of the device)
1: Supply
2: USB0
3: USB1
4: ETH0 (interface for information technology)
5: ETH1 (interface for operational technology)
NOTICE!
Wrong connection may cause damage to the unit.
► Observe the safety instructions.
NOTICE!
The short-circuit / reverse polarity protection of the unit applies to the operating voltage
connections. A short circuit between operating voltage VBB+ and USB might cause damage
to the device.
► Lay supply and signal cables away from the device using the shortest possible route.
► Provide all outgoing cables with a strain relief 200 mm behind the cable entry.
Maximum cable lengths:
•
USB ≤ 1.8 m
•
Ethernet ≤ 25 m
>
