IFM Electronic PG24 Series, Руководство по эксплуатации

Страница: 11 / 27

11
UK
7 Operating and display elements
Mode/
Enter
Set
1
2
3
4
5
6
1: Analogue display
-Display of the current system pressure in bar and PSI or mbar and inH2O�
2: LED ring
According to the setting of parameter [LED] (→ 9.2) :
-Display of set point and reset point�
-Lag indicator function for maximum value or minimum value�
-Display of pulsating signals and pressure peaks�
-Trend display: rising pressure or falling pressure�
3: Indicator LEDs
-LED 1 = system pressure of the digital display in bar�
-LED 2 = system pressure of the digital display in mbar�
-LED 3 = system pressure of the digital display in PSI�
-LED 4 = system pressure of the digital display in inH2O�
-LED 6 = system pressure in % of the scaling (range ASP to AEP) or COF value in %�
-LEDs 5, 7 = not used�
-LED 8 = switching status OUT1 (lights if output 1 is switched)
4: Alphanumeric display, 4 digits
-Display of the current system pressure�
-Display of the parameters and parameter values�
5: Touch button Set*
-Setting of the parameter values (continuously by touching permanently; step by step by
touching briefly several times)�