UK
Installation Guide O2Ixxx
5
The installation and connection must comply with the applicable national and
international standards� Responsibility lies with the person installing the multicode
reader�
Only the signals indicated in the technical data or on the device label may be
supplied to the connections or wires�
WARNING
Visible laser light; laser protection class 2�
Use of controls or adjustments other than those specified herein may result in
hazardous radiation exposure� Damage to the retina is possible�
► Do not stare into the laser beam!
► Apply the enclosed labels (laser warning) in the immediate vicinity of the
multicode reader�
► Adhere to the caution and warning notes on the product label�
► Use the enclosed label for the power supply cable�
3 System requirements
3.1 PC hardware
– PC with Pentium III processor or higher, clock frequency min� 500 MHz
– min� 128 MB RAM
– min� 35 MB freely available hard disc memory
– CD-ROM drive
– XGA compatible graphic card with min� 1024 x 768 pixel resolution
– Ethernet network card for 10Base-T/100Base-TX, TCP/IP protocol
3.2 PC software
– Operating system Microsoft Windows 2000, XP, Vista or Windows 7�
4 Items supplied
1 multicode reader O2Ixxx, screwdriver to set the focus, installation instructions�
The multicode reader is supplied without installation/connection accessories and
software�
