Installation Guide O2Ixxx
32
10.6 Overall function test
This final step tests all settings of the new configuration�
► Click on [Test on] (1�)�
► Click on [Release trigger] (2�)�
> The device performs reading/verification on the basis of the previous settings�
> The result field (3�) shows:
● Number of codes found (figure)
● Number of codes searched (figure)
● Code string (contents)
● Total decoding time (ms)
● Total time (ms)
With an activated internal triggering [Release trigger] is deactivated�
Click on [Test on] to carry out the reading/verification process
continuously�
► Click on [Test off] (4�) to quit�
► Click on [Next] (5�) to finish the configuration�
> The note [Do you want to save the configuration changes?] is displayed�
► Click on [OK]�
