IFM Electronic efector 600 TN21 Series, Руководство по эксплуатации

Страница: 15 / 19

15
UK
9.1 Parameter setting in general
1� Change from the RUN mode to the main menu [●]
2� Select the requested parameter [
▲
] or [
▼
]
3� Change to the setting mode [●]
4� Modification of the parameter value [
▲
] or [
▼
] > 1 s
5� Acknowledge the set parameter value [●]
6� Return to the RUN mode → 9.1.2
Press [▲] + [▼] simultaneously to leave the setting mode without saving
the changed parameter�
If [C�Loc] is displayed when attempting to change a parameter value, a
change is made via a parameter setting software at the same time (tempo-
rary locking)�
If [S�Loc] is displayed, the sensor is permanently locked via software� This
locking can only be removed with a parameter setting software�
9.1.1 Change between the menus
1� Change from the RUN mode to the main menu [●]
2� Select parameter EF [ ▼ ]
3� Change to the submenu EF [●]
4� Select parameter CFG, MEM, DIS [ ▼ ]
5� Change to the submenu CFG, MEM, DIS [●]
6� Return to the next upper menu [ ▲ ] + [ ▼ ] simultaneously
9.1.2 Change to the process value display (RUN mode)
There are 3 possibilities:
I� Wait for 30 seconds (→ 9.1.4) �
II� Press [▲] until the RUN mode is reached.
III� Press [▲] + [▼] simultaneously until the RUN mode is reached.