IES Wallbox G3, Руководство по установке

Страница: 21 / 40

www.ies-synergy.com
Installation Manual
DIM016055-EN
21
Wall mounting
I
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
• This equipment employs parts, such as switches and relays, that tend to produce arcs or
sparks and therefore, when used in a garage, locate in a room or enclosure provided for the
purpose or not less than 500mm above the floor.
Failure to follow these instructions will result in death or serious injury.
• Mounting bracket must be affixed to suitable wall capable of supporting 264kg
• Mounting location should be at least 500mm above ground
• Mounting location should not obstruct air intake and exhaust
• Wall type should be concrete, concrete block, or brick
• Wall type will determine the appropriate fastener and anchor type
• Fasteners should be countersunk head type concrete screws or sleeve anchors, 6mm with a minimum
length of 50mm
1. Using bracket as a template, level and mark drill
holes
2. Place the anchors and attach the bracket to the
wall with screws (8)
- position 1
1
Install Wallbox bracket
1