IEMCA Smart 320 Tp, Руководство по эксплуатации и техническому обслуживанию

Страница: 15 / 146

2 - TECHNICAL INFORMATION SMART320
EN
2 - Pag. 3 / 20
B SOLENOID VALVE UNIT; sends signals to the pneumatic components.
C BAR POSITIONING DEVICE; allows finding the bar aligning position on the magazine rack.
D MAGAZINE; stores the bars.
E LUBRICATION PUMP; delivers oil to the guide channels.
F REMNANT RECOVERY BOX; bar remnants are dropped into this box after extraction from the
bar pusher collet.
G KEYBOARD; it allows bar feeder programming and function actuation.
H PRESSURE REGULATOR; to adjust the pressure of the pneumatic devices.
L TELESCOPIC NOSE; allows bar guidance between the bar feeder and the headstock.
M HALF-BUSHING DEVICE, holds the bar centred.
N PNEUMATIC CYLINDER FOR GUIDE CHANNEL OPENING/CLOSING; provides motion to the
pneumatic devices to allow opening/closing the guide channels.
P UPPER GUIDE CHANNELS; drive the bar during the machining.
Q LOWER GUIDE CHANNELS; drive the bar during the machining.
R BAR PUSHER; pushes the bar during the machining.
S FEEDING CHAIN; transmits the motion from the motor to the bar pusher.
T CLAMPS; hold the bar during the loading and removal from the collet of the bar pusher.
U LATHE.