Print More Materials, All For Application
2
1.2 Precautions
First of all, thank you for choosing IEMAI 3D Printer！
This device is a Professional equipment, please read this manual carefully before starting to use,
this manual contains important information about the installation, operation, maintenance, and
common problems of the 3D printer, the company is not responsible for all losses caused by violation
of the cautions and operating procedures given in this manual。
Consumables: Please use the filament provided by our company or the third-party filament of
official authorized brand or choose the high-quality filament provided by other regular filament
manufacturers, and users should be responsible for the loss caused by using low-quality filament.
Please keep the consumables sealed and moisture-proof if not in use for a long time; please bake and
dry them in advance before using them again.
Software: Please use a 64-bit system with Windows 7 or above to run the software, more than 4G
of RAM and more than 1G of GPU, please use a computer with a higher configuration if possible.
Installation Site Requirements: Installation Site≥600*1000*900mm (L*W*H).
Installation Power Requirements：200~250 V, 50~60 Hz, 950w，Electric cable 1.5 m
2
or more.
Operating Environment: 15-30°C, 10-90% Relative Humidity, non-condensation
Storage Environment: 25-55°C, 10-90% Relative Humidity, non-condensation
