Print More Materials, All For Application
19
4.4 Model Removal
Step 1
1.
Printed model on the build
platform
Step 2
1.
Use a scraper from the lower left
corner of the model to insert
between the model and the
build platform to separate the
model from the build platform
Step 3
1.
Use a scraper from the lower
right corner of the model to
insert between the model and
the build platform to separate
the model from the build
platform
Step 4
1.
For the completed model the
base raft needs to be removed,
using the correct slicing
parameters the model and raft
body can be easily separated as a
whole by hand
Step 5
1.
The finished model and the
separated raft are finally
obtained
Attention：For large models that are not suitable for dismantling inside the machine, the building platform can
be taken out and dismantled outside.
