Print More Materials, All For Application
32
7.2 Temperature
Problem
Solution
Problem one: click on the heating, the temperature
does not change, a few seconds later prompted the
heating power is insufficient, check the heating
head temperature rise
Attention: temperature measurement careful of
high temperature hot hands
Whether the print head is installed, or whether the
wire is connected
Problem 2: Temperature display "1023"
Print head is not properly installed
7.3 Print
Problem
Solution
Problem 1: Prompt 1 extruder no material, cannot
print properly
Add filament at the break detection
Problem 2: The print appears to be detached
from the bottom and is carried away
After determining that the platform is able to
print that material, adjust the platform and
nozzle gap when the zero point is small (
see
Printing - Installing the Build Platform and
Leveling for more information
)
Problem 3: Use of automatic unload filament, but
stuck between extrusion gear and extrusion clamp
Remove the print head and cut off the deformation
part
