IEI Technology WSB-9154 Скачать руководство пользователя

Страница: 97 / 227

WSB-9154 CPU Card

Page 79

NOTE:

IEI has a wide range of backplanes available. Please contact your

WSB-9154 vendor, reseller or an IEI sales representative at

[email protected]

or visit the IEI website (

http://www.ieiworld.com.tw

)

to find out more about the available chassis.

5.5.2 Backplane Installation

Before the WSB-9154 can be installed into the chassis, a backplane must first be installed.

Please refer to the installation instructions that came with the backplane and the chassis

to see how to install the backplane into the chassis.

NOTE:

IEI has a wide range of backplanes available. Please contact your

WSB-9154 vendor, reseller or an IEI sales representative at

[email protected]

or visit the IEI website (

http://www.ieiworld.com.tw

)

to find out more about the available chassis.

5.5.3 CPU Card Installation

To install the WSB-9154 CPU card onto a backplane, carefully align the CPU card

interface connectors with the corresponding socket on the backplane. To do this, please

refer to the reference material that came with the backplane. Next, secure the CPU card to

the chassis. To do this, please refer to the reference material that came with the chassis.

Содержание WSB-9154




































































































































































































































Результаты поиска

Содержание WSB-9154

Отзывы:

Похожие инструкции для WSB-9154

Бренды по названию

Популярные бренды

IEI Technology WSB-9154, Руководство пользователя

Результаты поиска

Содержание WSB-9154

Отзывы:

Похожие инструкции для WSB-9154

Бренды по названию

Популярные бренды