WMS-2208R WEB MAIL SERVER SERVICE MANUAL
Chapter 6
PACKING FOR SHIPMENT
General Instructions
Packing in the Original Carton
Packing in a Different Carton
General Instructions
To ship a WMS-2208R or one of its components for any reason, please follow the
instructions in this section. Pack the WMS-2208R or component carefully.
Failure to follow the instructions in this section may result in loss or damage not
covered by any applicable IEI warranty. If available, use the original carton and
packing materials and follow the instructions in “Packing in the Original Carton.”
If the original shipping carton and material are not available, use other suitable
shipping materials and container and follow the instructions in Packing in a
Different Carton.”
Prior to shipping the WMS-2208R or component, contact IEI Customer Services
Department or your sales representative for a Returned Material Authorization
(RMA) number. Mark the shipping carton and any shipping forms with the RMA
number.
Caution: Observe ESD (electrostatic discharge) precautions when
packing any WMS-2208R components.
Packing in the Original Carton
If the original carton and packing materials are available, repack the
WMS-2208R into the original carton. Add packing material in the carton as
needed so the WMS-2208R will not be able to move during shipment.
Packing in a Different Carton
If the original carton and packing material are not available when shipping an
WMS-2208R or one of its components:
1.
Place the WMS-2208R or component in a plastic bag.
2.
Locate a corrugated cardboard shipping carton with at least 200 pounds
per square inch (psi) bursting strength.
3.
Fill the bottom of the carton with at least 2 inches of packing material.
4.
Place the bagged WMS-2208R or component on the layer of packing
material and fill the box completely with packing material such that there
is at least 2 inches of packing material around all sides of the item.
IEI CONFIDENTIAL
18
