WMS-2208R WEB MAIL SERVER SERVICE MANUAL
Chapter 4
DISASSEMBLY GUIDE
Overview
System Disassembly & Assembly
Overview
The WMS-2208R can be disassembled into the following assemblies:
The WMS-2208R main board
The front panel assembly, including the LCD module
The MailWare flash module (DOM, for system manufactured after November
10, 2003)
The top cover
The case fan
The hard disk
Tools Required
The tools you will need to disassemble or reassemble the WMS-2208R is listed
as below:
One number 102 Phillips-head screwdriver
One number 107 Phillips-head screwdriver
One 5-mm spanner
One diagonal pliers (for cutting the cable tie)
Caution: Observe ESD (electrostatic discharge) precautions when
disassembling and reassembling the WMS-2208R and when handling
any of the components of the WMS-2208R.
System Disassembly and Reassembly
Use the following procedure to disassemble the WMS-2208R, reassemble it in
reverse order. It is recommended that you follow this disassembly procedure
in the order presented.
Note: Before you begin to disassemble the WMS-2208R, make sure
that the system has been shutdown and the power cord is removed.
IEI CONFIDENTIAL
10
