WMS-2208R WEB MAIL SERVER SERVICE MANUAL
Chapter 7
REINSTALLING FIRMWARE
Overview
Overview
Since November 10, 2003, WMS-2208R uses a flash module (CN2) to store its
firmware. This MailWare flash module is connected to the main board via an IDE
socket. There is no need to re-install the firmware, just replaces the MailWare
flash module when failed.
Please refer to the disassembly guide for replacing the flash module. To obtain
the flash module for replacement, please contact IEI Customer Support
Department or your sales representatives.
Caution: After replacing a new MailWare flash module, all the existing
configuration data will be lost.
After changing a new MailWare flash module, please remember to continue to
configure the system to the factory default settings, such as initialize disk
configuration. To initialize system configuration, please refer to chapter 9,
“Factory Default Setup.”
Note: To reinstall system firmware to WMS-2208R that manufactured
before November 10, 2003, please contact iEi Customer Service
Department.
IEI CONFIDENTIAL
20
