WMS-2208R WEB MAIL SERVER SERVICE MANUAL
Chapter 8
HARD DISK INSTALLATION
Overview
Hard Drive Installation Procedure
Overview
The WMS-2208R can install up to two 3.5” IDE hard disk drives. To make the
system ready for mail service, install at least one hard drive to the WMS-2208R.
Then refer to the chapter 9, “Factory Default Setup”, for steps to initialize the
installed hard drives for mail storage.
For a list of verified hard drive models, please refer to Appendix A. “Hard Drive
Compatibility List.” We strongly recommend customers to use only the tested
hard drive models. IEI cannot guarantee system stability for users who install
drives not specified on this list.
Hard Drive Installation Procedure
To use the WMS-2208R, at least one hard disk should be installed. Before
installing the hard drives, please make sure the system is off and the power cord
has been disconnected. Follow below steps to install the hard drives to the
WMS-2208R.
1.
Attach stickers onto the hard disks:
c.
HDD1
HDD2
IEI CONFIDENTIAL
21
