IEI Technology WAFER-8523, Руководство пользователя

Страница: 75 / 177

WAFER-8523 User Manual
Page 60
The CF Card Setup jumper location is shown in Figure 5-4 .
Figure 5-4: CF Card Setup Jumper Location
5.4.3 Clear CMOS Jumper
Jumper Label: JP3
Jumper Type: 3-pin header
Jumper Settings: See
7
Table 5-4
Jumper Location: See
7
Figure 5-5
If the WAFER-8523 fails to boot due to improper BIOS settings, the clear CMOS jumper
clears the CMOS data and resets the system BIOS information. To do this, use the jumper
cap to close pins 2 and 3 for a few seconds then reinstall the jumper clip back to pins 1
and 2. If the “CMOS Settings Wrong” message is displayed during the boot up process,
the fault may be corrected by pressing the F1 to enter the CMOS Setup menu. Do one of
the following:
Enter the correct CMOS setting
Load Optimal Defaults
Load Failsafe Defaults.
After having done one of the above, save the changes and exit the CMOS Setup menu.