manualshive.com logo in svg

IEI Technology SAGP-648E, Руководство пользователя

Поделиться
Скачать
IEI Technology SAGP-648E Скачать руководство пользователя страница 32

 

32

Boot To OS/2 

 

Set this option to YES if running OS/2 operating system and using 

more than 64MB of system memory on the motherboard.  The options 

are YES or NO.  

 

Internal Cache 

 

The setting enabled or disabled the internal cache memory in the 

processor.  

 

External Cache 

 

The setting enables secondary cache memory.  If Enabled is selected, 

external cache memory is enabled.  If disabled is select, external 

cache memory is disabled.  

 

System BIOS Cacheable 

 

When this setting is set to Enabled, the System ROM area from F0000-

FFFFF is copied (shadowed) to RAM for faster execution.  

 

C000, 32k Shadow 

 

This setting is about the contents inside the Video ROM area form 

C000-C7FFF, which influences the speed of execution.  

Disabled: The contents of the video ROM are not copied to RAM.  

Cached: The contents of the video ROM area from C0000h - C7FFFh are 

copied from ROM to RAM and can be written to or read from cache 

memory. 

Enabled: The contents of the video ROM area from C0000h - C7FFFh 

are copied (shadowed) from ROM to RAM for faster execution.  

 

C800, 16k Shadow 

 

These settings enable shadowing of the contents of the ROM area 

named in the option title.  The options are Enable Disable, Cached.  

The ROM area that is not used by ISA adapter cards will be allocated 

to PCI adapter cards.000, 32k Shadow. 

 

CC00, 16k Shadow 

 

These settings enable shadowing of the contents of the ROM area 

named in the setting title.  The settings are Enable Disable, Cached.  

The ROM area that is not used by ISA adapter cards will be allocated 

to PCI adapter cards.800, 16k Shadow 

 

D000, 16k Shadow 

 

These settings enable shadowing of the contents of the ROM area 

named in the setting title.  The options are Enable, Disable, and 

Cached.  The ROM area that is not used by ISA adapter cards will be 

allocated to PCI adapter cards.  C00, 16k Shadow. 

 

Содержание SAGP-648E

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды