manualshive.com logo in svg

IEI Technology SAGP-648E, Руководство пользователя

Поделиться
Скачать
IEI Technology SAGP-648E Скачать руководство пользователя страница 31

 

31

 

Try Other Boot Devices 

 

The options are Yes or No.  Set this setting to Yes to instruct AMIBIOS 

to attempt to boot from any other drives in the system if it cannot find 

a boot drive among the drives specified in the 1st Boot Device, 2nd 

Boot Device, 3rd Boot Device, 4th Boot Device options.  

 

Floppy Access Control 

 

This setting specifies the assigned read/write access that when booting 

from a floppy drive.  The options are Read/Write or Read-Only.  

 

Hard Disk Access Control 

 

This setting specifies the assigned read/write access that when booting 

from a hard disk drive.  The options are Read/Write or Read-Only.  

 

S.M.A.R.T. for Hard Disks 

 

S.M.A.R.T. stands for Self-Monitoring, Analysis and Reporting 

Technology.  This setting can help BIOS to warn the user of the 

possible device failure and let the user back up the device before 

actual failure happens.  The options are Disabled, Enabled.  

 

Boot Up Num-Lock  

 

If the user wants the Num-Lock function to be turned on during the 

boot-up period so that the user can use the key pad on the keyboard 

right after the system starts, please select ON to do so.  Otherwise, 

select OFF. 

 

PS/2 Mouse Support 

 

When this setting is enabled, BIOS support a PS/2- type mouse.  

 

System Keyboard 

 

This won’t be specified if a keyboard is attached to the computer.  

Otherwise, when there’s no keyboard detected and an error message 

is displayed, this setting can be marked as needed.  This setting 

permits you to configure workstation with no keyboard.  The options 

are Absent, Present.  

 

Primary Display 

 

This setting is to configure the type of monitor attached to the 

computer.  The settings are Monochrome, Color 40x25,Color 

80x25,VGA/PGA/EGA, or Not Install. 

 

Password Check 

 

This option enables the password check option every time the system 

boots or the end user runs Setup.  If always is chosen a user password 

prompt appears every time the computer is tuned on.  If setup is 

chosen, the password prompt appears if BIOS is executed. 

 

Содержание SAGP-648E

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды