11
2.3 Unpacking Precautions
Some components on SAGP-648E are very sensitive to static electric
charges and can be damaged by a sudden rush of power. To protect
it from unintended damage, be sure to follow these precautions:
•
Ground yourself to remove any static charge before touching
SAGP-648E. You can do it by using a grounded wrist strap at all
times or by frequently touching any conducting materials that is
connected to the ground.
•
Handle SAGP-648E by its edges. Don’t touch IC chips, leads or
circuitry if not necessary.
•
Do not plug any connector or jumper while the power is on.
Note: All shaded rows in tables of this manual are the default settings
for SAGP-648E.
2.4 Clear CMOS Setup
To clear CMOS Setup (for example if you have forgotten the password,
you should clear the CMOS and then re-set the password), you should
close the JP2 (1-2) for about 3 seconds, and open it once more. This
will set back to normal operation mode.
•
JP2: Clear CMOS Setup
JP2 Description
2-3 (Default)*
Keep CMOS Setup
(Normal Operation)
Short 1-2
Clear CMOS Setup
2.5 Compact Flash Master/Slave Function Setting
•
JP6: Compact Flash Master/Slave Function Setting
Short 1 - 2 pin, Compact Flash is Master
JP6 Description
Close
Master
Open
Slave
