25
Adjust the Unoccupied Heat Setpoint – Press the UP or DOWN button
to adjust the Heating setpoint for times when the thermostat is in
Unoccupied.
The following steps determine when the Occupied period(s) will be
active.
Enable Occupied 1 – Press the UP or DOWN button to enable (On) or to
disable (Off) Occupied 1 on Monday.
Adjust the Start Time for Occupied 1 – Press the UP or DOWN button
to adjust the start time for Occupied 1 on Monday.
Upon pressing MODE after the above step; you will be prompted to Save
and Exit or Copy this Occupied schedule to another day.
To save and exit – Press the MODE and UP button.
To Copy Monday’s settings/schedule to Tuesday – Press Up and
then MODE. Press MODE again to copy the Monday Settings/
schedule to subsequent days.
To Program Another Day – Press MODE and then press the UP/
DOWN button to select the day to program. Repeat the above
steps for each day you would like to program.
Press and hold the MODE/UP Buttons to exit Time Period Programming
at any time.
(Continued)
Programming a Daily Schedule
