12
User Setup
How to Change Settings in the Setup Screens
To enter the setup screens, press the MODE button, and simultaneously
press FAN button for 5 seconds. Release the buttons when you see
“Setup” on the display. Use the UP or DOWN buttons to adjust the value
of your selection. Press MODE to advance to the next setup step. Press
MODE and FAN together again to leave the setup screens.
FAN
MODE
press together
for 5 seconds
TO ENTER MENUS BUTTON PRESS
Setup Steps
MODE & FAN for 5 seconds
Time Schedule
MODE & UP for 2 seconds
Emergency Heat
UP & FAN for 2 seconds
Lockout Buttons
MODE, UP & DOWN for 2 seconds
Calibration
MODE & DOWN for 2 seconds,
then MODE
Wireless Setup
FAN for 5 seconds unless running
time period program
Table for button
presses that are
required for
entering various
menus
