5
4
PART
DESCRIPTION
QUANTITY
J
Exhaust Hose
1
K
Exhaust Nozzle Connector
2
L
Tube Adapter
1
M
Screw (assembly required)
4
N
Window Panel Extension
1
O
Window Panel
1
P
Drain Hose
1
Q
Remote Control
1
R
AAA Batteries
2
J
L
O
M
N
PACKAGE CONTENTS
(NOT shown actual size)
K
P
Q
R
R
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
Portable air conditioners exhaust large amounts of room air. Always ensure an adequate supply of
make-up air to operate effi ciently.
• Check available power supply and resolve any wiring problems BEFORE installation and
operation of this unit. All wiring must comply with local and national electrical codes and be
installed by a qualifi ed electrician. If you have any questions regarding the following instructions,
contact a qualifi ed electrician.
• This appliance draws 9.5 nameplate amps and may be used in any properly wired general
purpose 15 amp household grounded receptacle.
•
For your safety and protection, this unit is grounded through the power cord plug when plugged
into a matching wall outlet. If you are not sure whether the wall outlets in your home are properly
grounded, consult a qualifi ed electrician.
DANGER
• Do not leave this unit unattended in a space where people or animals that cannot react to
a failed unit are located. A failed unit can cause extreme overheating or death in such an
enclosed, unattended space.
POWER SUPPLY CORD
The power cord supplied with this air conditioner contains a device that senses damage to the power
cord. To test if your power cord is working properly, you must do the following:
• Connect the power supply cord to an electrical outlet.
• The power supply cord has two buttons located on the head of the plug. One button is marked
“TEST” and the other is marked “RESET.” Press the “TEST” button; you will hear a click as the
“RESET” button pops out.
• Press the “RESET” button; you will hear a click as the button engages.
• The power supply cord is now energized and supplying electricity to the air conditioner (on
some products this is also indicated by a light on the plug head.)
•
Note:
The power cord supplied with this air conditioner contains a current leakage detection
device designed to reduce the risk of fi re. In the event the power supply cord is damaged, it
cannot be repaired and must be replaced with a new cord from the product manufacturer.
• Under no circumstance should this device be used to turn the unit on or off.
• The reset button must always be pushed in (engaged) for correct operation.
• The power supply cord must be replaced if it fails to reset when the “TEST” button is pushed in.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time:
20 minutes
Tools Required for Assembly (not included): Phillips Screwdriver
WARNING
• Improper connection of the grounding plug can result in risk of fi re, electric shock, and/or injury
to persons associated with the appliance. Check with a qualifi ed service representative if in
doubt that the appliance is properly grounded.
• DO NOT USE PLUG ADAPTERS OR EXTENSION CORDS WITH THIS UNIT. If it is
necessary to use an extension cord with this unit, use an approved “air conditioner” extension
cord only.
• To avoid the possibility of personal injury, always disconnect the power supply to the unit
before installing and/or servicing.
Lowes.com
Lowes.com
