26:4 The print engine MCU reported a
flip
position
motor
fault
while
rotating the flipper. Note that this
is the flipper motor which drives
the card, not the rotation motor.
26:5 The print engine MCU reported a
flip rotation motor fault. Note that
this is the flipper motor which
rotates the flipper, not the one
which
drives
the
card
26:6 The print engine MCU reported a
main
card
drive
motor
fault.
27
CLEAN REQUIRED
27:0 On start-up, the printer detected
that it was overdue for cleaning.
28
PRINTHEAD ERROR 28:0 The printhead does not seem to
be
fitted.
29
SD CARD MISSING
29:0 The internal SD card could not be
detected.
30
MAG VERIFY FAIL
30:0 While attempting to verify mag
data
after
an
encoding
operation,
the printer found that the data
read back from the mag stripe did
not
match
the
data
written.
31
COLOUR DISABLED 31:0 The printer received a colour print
job but does not have colour
printing
enabled.
ERROR TEXT DISPLAYED
ON PRINTER
ERROR DESCRIPTION
SOLUTION BY CATEGORY
40
