13
INTERNAL ERROR
13:1 The printhead took too long
to
reach
a
temperature
suitable
for printing. There may be a fault
with
the
printhead
temperature
sensor.
13:2 The mag PCB MCU reported that
an error occurred while trying to
carry out an operation or interpret
a
command.
13:3 The mag driver reported that an
error
occurred
while
trying
to
carry
out
an
operation.
13:4
Communication
with
the
engine
microcontroller
failed.
If
rebooting the printer does not fix
this
problem,
try
updating
the
firmware. If that does not work,
there is probably a hardware fault.
13:5
The
engine
microcontroller
reported an error. If rebooting the
printer does not fix this problem,
try updating the firmware. If that
does not work, there is probably a
hardware
fault.
14
WRONG SD CARD
14:0 The internal SD card did not have
a
valid
signature.
15
HOLOKOTE INVALID 15:0 While attempting to validate a
Holokote
file,
the
printer
found
that the file was not in the right
format. Either it is not the right
type of file, or the data has been
corrupted.
ERROR TEXT DISPLAYED
ON PRINTER
ERROR DESCRIPTION
SOLUTION BY CATEGORY
36
