ID Card Printer - User Manual
31
8.1
8.2
8.3
9.0
9.1
9.2
9
10.0
10
10.1
10.2
While ini�alising the cam, it took too long
to detect the leading edge of the cam pulley
flag.
While ini�alising the cam and having
detected the leading edge of the cam pulley
flag, it took too long to detect the trailing
edge of the cam pulley flag.
While moving the printhead cam to the
open posi�on, it took too long to detect
the leading edge of the cam pulley flag.
While ini�alising the flipper, it took too long
to detect the start of the blocked region
of the flange.
While ini�alising the flipper and having
detected the start of the blocked region
of the flange, it took too long to detect the
start of the unblocked region (the start of
the slot).
ERROR TEXT DISPLAYED
ON PRINTER
ERROR DESCRIPTION
SOLUTION BY CATEGORY
While moving the card backwards to feed
into the flipper and having seen the card
arrive at the mid sensor, it took too long
for the mid sensor to unblock.
The printer received a print job. The side
number specified for one of the sides of the
image data was invalid. This probably
means the print job file was corrupt.
The printer received a print job. The format
specified for the image payload was not
supported. If upda�ng the firmware does
not fix this, it may be that the print job file
is corrupt.
The printer received a print job containing
magne�c track data. One of the tracks
specified an invalid track number.
Flip Error
Invalid File
