IDVille ID Maker Apex, Руководство по началу работы

Страница: 31 / 48

ID Card Printer - User Manual
ERROR TEXT DISPLAYED
ON PRINTER
ERROR DESCRIPTION SOLUTION BY CATEGORY
1 LID OPEN 1:0 The lid was opened while the Close the Lid and try again.
print engine was performing an
operation.
1:1 The lid was opened at the point
the printer was about to begin
a print job.
2 OUT OF CARDS 2:5 While feeding a card from the Load the printer’s rear feed
hopper, it took too long for the hopper to continue.
rear sensor to block.
2:6 While trying to feed a card from
the hopper, it took too long for
the front sensor to block.
3 HAND FEED ERROR 3:0 While hand feeding a card, it Check "Hand Feed" mode.
took too long for the front
sensor to block.
3:1 While hand feeding a card, it
took too long for the hopper
sensor to detect a card.
4 CARD JAM 4:0 While moving the card forwards Open the printer's Lid and
to the front sensor in remove the jammed card
preparation for placing it in the to continue.
contactless encoding position,
it took too long for the front
sensor to block.
4:1 While moving the card
backwards from the front
sensor to the contactless
encoding position, it took too
long for the front sensor to
unblock.
31