IDVille ID Maker Apex, Руководство по началу работы

Страница: 35 / 48

35
ERROR TEXT DISPLAYED
ON PRINTER
ERROR DESCRIPTION SOLUTION BY CATEGORY
ID Card Printer - User Manual
5 OUT OF FILM 5:0 While moving a dye panel edge Check dye film is fitted and
from the dye sensor to the not expired. Also check the
printhead, it took too long for Film is not torn.
the tacho wheel to move the
required amount. The film has
probably either run out or
snapped.
5:1 While advancing to the next
dye panel, it too long for the
next panel boundary to be
detected.
5:2 It took too many attempts for
the printer to find a particular
panel of dye film (possibly
because the dye sensor needs
calibration).
5:3 A valid dye film RFID tag was
found, but no physical ribbon
could be detected while trying
to take up the film slack.
5:4 A valid dye film RFID tag was
found, but there were no shots
remaining.
5:5 After printing a card, the printer
was unable to decrement the
number of remaining prints on
the dye film RFID tag.
5:6 While advancing the dye film, Check dye film.
the printer detected the end-
of-film marker.