IDVille ID Maker Apex, Руководство по началу работы

Страница: 30 / 48

ID Card Printer - User Manual
If you have a printer fi�ed with the opiton magne�c encoding module, you can print and encode the data
on the rear of the card in one opera�on. The magne�c enconding module can encode both HiCo and LoCo
magne�c stripe card specifica�ons.
When loading magne�c stripe cards, make sure the stripe is facing down on the le� side of the printer
(as viewed from the front). To encode a magne�c stripe card, please refer t oyour card prin�ng applica�on
although its also possible directly via the driver interface.
USING MAGNETIC STRIPE CARDS
There are many types of self-adhesive cards. Thorough inves�ga�on and tes�ng has shown that poor quality or
incorrect card types will cause:
• Poor image quality.
• Card feed failures.
• Cu�ng or snapping dye film.
• Cards jamming during prin�ng.
We recommend only using self-adhesive cards supplied by your ID card supplier.
USING SELF-ADHESIVE CARDS
Printers can be supplied in two variants: UNO (single-sided) or DUO (double-sided). Single sided printers can be
upgraded to DUO func�onality via an electronic update. This is available from your printer supplier.
UPGRADING TO DUO OPERATION
Digital shredding - once data has been used for the print job, it is fragmented,
rendering it irrecoverable, helping to ensure the printer is a repository for
your sensi�ve data.
30
GENERAL DATA PROTECTION REGULATION (GDPR)