Product Features
□
□
□
Data Conversion between RS-232/422/485 and Ethernet
Convert serial device (RS-232, RS-422, RS-485) data/signal into the TCP/IP
package data/signal and send them out with the Ethernet DataStream; or convert
the TCP/IP package data/signal into serial device data/signal.
□
□
□
Dynamic IP Configuration
Support DHCP client mode, simplifying network address configuration and
management.
□
□
□
Dual LAN Speed
Support 10/100 Mbps Ethernet, auto-detected.
□
□
□
Server / Client Dual Modes
ARM-7 Series can be configured as network server or network client. In the client
mode, it can be installed in network which is protected by NAT router or firewall,
without the need of a real IP address.
□
□
□
Web-based Setup
Parameters setup is based on HTTP protocol by using standard browsers (IE and
Netscape). No special software would be required.
□
□
□
Built-in Security Control
Protected by setup password to prevent intruders.
□
□
□
Firmware Remote Update
Firmware can be updated directly via Ethernet network to keep up with latest
network standards.
8
HIMAQ S.R.L - Tel.: (011) 4709-3505 - Mail: [email protected] - WEB: http://www.himaq.com.ar
