28
□
□
□
TCP socket inactive timeout imput
we add a mechanism - "inactive timeout" to identify whether the socket is active
or dead. If there is no any data transferred (send / receive) within the defined
timeout period (1 to 99 minutes), then it is probably a dead socket, and the socket
will be closed automatically, thus a new connection can be accepted again. The
timeout period can be set by users to fit different kinds of application.
□
□
□
Packet mode of serial input
Packet mode could be in enabled/disabled mode. If packet mode is enabled, the
data input from UART will be deferred until the input buffer is full, or the converter
detects a 10-character packet gap and no more character arrived. The block
waiting time is extended to avoid the splitting of the complete packet.
□
□
□
Device ID
User assigned ID number for the converter. Available ID is “0 ~ 65535”.
□
□
□
Report device ID when connected
In TCP mode, if this parameter is enabled, every time when the socket is connected,
E-P132-X TCP/IP converter will immediately report its device ID in the following
formats:
Serial #1
nnnnnA[LF][CR]
Serial #2
nnnnnB[LF][CR]
Digital I/O
nnnnnC[LF][CR]
The total length is 8 bytes, where “nnnnn” is a 5-digit device ID assigned by the
user; [LF] is decimal 10; [CR] is decimal 13.
□
□
□
Setup password
Administration password used to login the “Controller Setup” page. It may be empty
or up to 15 characters long.
□
□
□
Serial Port 1
The first serial port of E-P132-X series is RS-232.
HIMAQ S.R.L - Tel.: (011) 4709-3505 - Mail: [email protected] - WEB: http://www.himaq.com.ar
