IDTECK Star Finger007 Скачать руководство пользователя страница 6

Страница: 6 / 61

20030516

User’s Manual

STAR FINGER007

2. INTRODUCTION

2.1 IDENTIFYING SUPPLIED PARTS

Please unpack and check the contents of the box. (Optional accessories, if purchased, may be included in
the package)

2.2 ABOUT STAR FINGER007

The

STAR FINGER007

is a highly advanced, intelligent single door controller with a powerful 32bit and

dual 8bit microprocessor to meet the market requirement for a robust integrated solution for access

control and time & attendance. The unit is designed to be flexible and reliable as well as provide the

ultimate in biometric high security at a reasonable cost. This user-friendly device allows you to register

up to 720 fingerprint IDs (optional 2,000/4,500); add / delete user IDs conveniently; store up to 26,000

transactions in its event buffer; easily report and archive information to Excel or Access databases; and

ultimately successfully manage all access control and time & attendance issues. With a built-in 4" RF

reader, keypad for Personal Identification Numbers (PIN), and a sophisticated biometric fingerprint

analyzer, the

FINGER007

offers up to three levels of ID verification. Any combination of prox, PIN, and

biometric may be used and different verification levels can be custom programmed for each user or user

group. Four independent input ports can be utilized for a wide variety of controls including exit buttons,

door contacts, PIR sensors and fire detection equipment. Actions to be taken and time settings can be

programmed with the front keypad or via the intuitive Windows based software program. The

FINGER007

can be used both as a stand-alone system and also be networked. All control setting values

such as ID numbers, inputs/outputs, real-time clock, time schedules, and event transaction reports can

be uploaded and/or downloaded to and from the host computer. The compact and contemporary unit is

easily installed and programming requires no significant knowledge of access control or time &

attendance. The Three-LED indicator lights inform you of the systems operating status at real time and

the digital display acts as a programming aid as well as a regulation time clock. By bundling the ultimate

in high security access control and comprehensive employee management tools into a compact user

friendly unit, the field proven

STAR FINGER007

has made real what until recently was thought only to

be possible in science fiction.

Содержание Star Finger007






























































Результаты поиска

Содержание Star Finger007

Отзывы:

Похожие инструкции для Star Finger007

Бренды по названию

Популярные бренды

IDTECK Star Finger007, Руководство пользователя

Результаты поиска

Содержание Star Finger007

Отзывы:

Похожие инструкции для Star Finger007

Бренды по названию

Популярные бренды