IDTECK Star Finger007, Руководство пользователя

Страница: 24 / 61

20030516
User’s Manual
24
STAR FINGER007
•
The [ID] is Personal Identification Number What you can use RF Card or Keypad. In case of RF Card,
ID number consists of 3-digits Facility code from 000 to 255 and 5-digits ID number form 00000 to
65535 so that the 8-digits ID number can not exceed 25565535. But, in case of Keypad, you can use 4
~ 8 digit for ID number. (ID number of
FINGER007SR has 10-digits decimal numbers.)
•
The [PW] is for password input the password is needed to access doors when the controller is
operating in RF+Finger(P/W) or RF+P/W+Finger mode. But regardless of the operating mode, it is
necessary to input a password when registering.
•
The [TS] is Time Schedule code (00-10). [TS] is the Time Schedule for the Main Reader, Extra Reader.
When you present the card to Reader then the cardholder is only allowed the access of the door during
the Time Schedule code entered to TS__ . To control the accessible Time Schedule for each
cardholder, you must setup the Time schedules first and enter the Time Schedule code here. If you
want to access the door anytime for the cardholder then enter default Time Schedule code '00' for the
value.
•
The [RD] is reader usage codes for the cardholder. If you put ‘1’ for RD then Main Reader is accessible
and if you put ‘0’ for RD then the cardholder can not access through the Main and Extra Reader, and
FINGER007
generates an error message “Access Door Error!” and displays on the LCD. To get access
through all Readers, you have to input “3” value for RD.
•
The [FP] is for using fingerprint. If “1” is entered for the value, the user has to register fingerprint. And
the user certification of fingerprint in RF+Finger(P/W) and RF+P/W+Finger mode. If “0” is entered for
the value, fingerprint substitute by password.