※
FINGER006 SERIES QUICK INSTALLATION GUIDE
2
1. IMPORTANT SAFETY INSTRUCTION
When using
Fingerprint Identification (Proximity / PIN) Reader
, basic safety precautions should
always be followed to reduce the risk of fire, electrical shock, and injury to persons.
In addition, the following safety guides should also be followed:
1.
Fully
read and understand all instructions and follow them completely.
2.
Follow
all warnings and instructions marked on the product.
3.
Do not
use liquid or aerosol cleaners. Use a damp cloth for cleaning. If necessary, use mild soap.
4.
Do not
use this product near water.
5.
Only
operate this product using the type of power source indicated. If you are not sure of the type of power
supplied to your installation site, consult your dealer of local power company.
6.
Never
insert objects of any kind into the product or through the cabinet slots as they may touch
voltage points and/or short circuit parts possibly resulting in fire or electric shock.
Never spill liquid of any kind on the product.
7.
Never
disassemble this product by yourself; take the unit to a qualified service center
whenever service or repair is required. Opening or removing the covers may expose you to dangerous voltages
or other risks. Also, incorrect reassembly can cause electric shock when the unit is subsequently used.
8.
Unplug
this product from the Direct Current (DC) power source and refer to qualified service
personnel under these conditions:
a.
When the power supply cord or plug is damaged or frayed.
b.
If liquid has been spilled on the product.
c.
If the product does not operate normally after following the operating instructions in this manual.
Adjust only those controls that are covered by the operating instructions in this manual. Improper
adjustment of other controls that are not covered by this manual may damage the unit and will often
require extensive work by a qualified technician to restore normal operation.
d.
If the product exhibits a distinct change in performance.
2. WHAT’S INCLUDED
Please unpack and check the contents of the box. If any of these parts are missing, please contact a nearby distributor
or IDTECK.
