10
Quick Installation Guide
4.3.3 2.2K Resistance Connection for Cut Off Check
Make sure to connect a 2.2K Resistor between the input wire (e.g. Orange wire) and the
GND to activate the Cut Off Check function. First, select whether or not to check the Cut Off
status of each device from “F2 SETUP MENU”-> “5.IN/OUT DEFINE” -> “21.CUT OFF CHECK”.
Second, set the desired output that will be generated in the event of a cut off from
“F2 SETUP MENU” -> “5.IN/OUT DEFINE” -> “18. CUT OFF ALARM”.
Figure: 2.2K Resistance Connection for Cut Off Check
